 |
|
- This portable and compact, high-performance threading machine has a self-opening die head and a through die head oiling system. It is completely equipped and ready to cut, thread, and ream pipe up to 1-1/2" inches in diameter.
|
 |
|
- Features complete interchangeability with the Model 300 dies and
die heads. This portable and compact, high-performance threading machine
has a self-opening die head and a through die head oiling system.
It is Completely equipped to cut, thread and ream.
|
 |
|
- This portable and compact, high-performance threading machine has a self-opening die head and a through die head oiling system. It is Completely equipped and ready to cut, thread, and ream pipe up to 2 inches in diameter. This universal machine is completley interchangeable with the Ridgid 811A Die Heads and Dies.
|
 |
|
- 1/2 HP Universal Electric 115 volt Reversible Motor 40 RPM, 1/4" - 2" Pipe Threading Capacity, 1/8" - 2" Pipe Cutting Capacity, Heavy Duty Forward/Off/Reverse Switch mounted on the Body, Heavy Duty Integrated Foot Pedal Switch, 2 sets of High Speed Steel Dies that last 4 time longer than Ridgid's OEM Alloy pipe threader dies
|
 |
|
-
This Industrial Quality Affordable Pipe Threading Machine is used for Threading, Cutting, and Reaming various sizes of Water, Electric, and Gas Pipes ranging from ½”-4” Inches NPT. A Heavy Duty Steel Powder Coated Cart makes it easy to transport you machine around the shop, jobsite, or factory. The Solid Rubber Tires will not go flat like pneumatic tires and will last for decades.
|
 |
|
- Range of Work: 2-1/2" - 6" NPT
- Screwing Die:
2-1/2" - 4",
5"-6", Rockwell Hardness HRC 58-62
- Electric Motor: 2 Speed Non Reversible 110 Volt 60 HZ 1100 Watt Motor
- Minimum and Maximum Output Rotational Speed:
6 or 16 Turns per Minute
- Maximum Chuck Capacity: 6.3Inches or 180 MM
- Sledge Travel: 7 Inches
- Oil Feeder: Steel Gear Driven Pump with Automatic Re circulation
|
 |
|
- The SDT Model 918 Hydraulic Roll Groover features a powerful 15-ton hydraulic ram in a compact, easy to transport unit. With one man set-up and operation, the 918 is the ideal groover for job site requirements. Designed to provide maximum efficiency, the 918 is capable of grooving up to 12" Schedule 10 and 8" Schedule 40 standard wall pipes. Roll Set changeout is accomplished in seconds.
|
 |
|
- The SDT Model 918 Hydraulic Roll Groover features a powerful 15-ton hydraulic ram in a compact, easy to transport unit. With one man set-up and operation, the 918 is the ideal groover for job site requirements. The 918 mounts quickly to a RIDGID 300 power drive, 535, 1822, or 1224 Threading Machines. Designed to provide maximum efficiency, the 918 is capable of grooving up to 12" Schedule 10 and 8" Schedule 40 standard wall pipes. Roll Set changeout is accomplished in seconds.
|
 |
|
- Motor: Professional 1350W Universal Reversible 115V 60Hz 14.8 amps
- Switch: Heavy Duty Paddle Type Switch with Separate Forward and Reverse Switches.
- Heavy Duty Forged Aluminum Gear Housing for Long Life.
- Body and Handle: Durable Heavy Duty Fiberglass Reinforced Plastic
- Capacity: 1/2" - 2 "
|
 |
|
- 1- Ratchet Head and Handle
- 1- Steel Tool Box
- 6- Die Heads (1/2"), (3/4"), (1"), (1-1/4"), (1-1/2"), (2")
- 6- Alloy NPT Dies Sets (1/2"), (3/4"), (1"), (1-1/4"), (1-1/2"), (2")
|
